What is the output voltage of a phototransistor?

That means the output is at 4.4 V, which means that there is 600 mV across the 10 kΩ resistor, which means that the current is 60 µA. That is apparently the current your phototransistor can support with the illumination you are supplying.

How to make a simple light sensor?

Step 1: Print Your Circuit Card or Plan Alternative Layout. ...
Step 2: Version 1.0: Add the Resistor. ...
Step 3: Version 1.0: Add the Light Sensor and LED and Tape Down the Positive (+) Side. ...
Step 4: Version 1.0: Tape Down the Negative/Ground Side of the Circuit. ...
Step 5: Version 1.0: Add the Battery and Binder Clip Switch.
More items...

Is a a light sensor?

This Light Sensor is a simple sensor that detects ambient light. It's kind of the opposite of an LED - when light hits the little chip inside, it induces current to flow from the long pin to the short pin.infrared photography

What is the output of a photodiode sensor?

While the photodiode has an electrical current as output, the output of a photodetector is a voltage.

Is photoresistor active or passive?

A photoresistor (also known as a light-dependent resistor, LDR, or photo-conductive cell) is a passive component that decreases in resistance as a result of increasing luminosity (light) on its sensitive surface, in other words, it exhibits photoconductivity.

What is the main application of photoresistor?

Typical applications of a photoresistor include light and dark-activated switching circuits, alarm systems, light meters in cameras, street lighting control, clock radios and night lights. They are also used in mechanical imaging devices for edge detection.ir infrared repeater

What is the purpose of a photoresistor?

0:01
2:35
Let's take a look at how a photoresistor works a resistor is an electronic component that reducesMore

Does a phototransistor receive light from an LED?

As they said, yes, a phototransistor can receive light from LEDs. Specifically, the light-proof plastic package of the LED and phototransistor enables the phototransistor to receive light. The phototransistor is turned on when an LED receives a current from an external source.

Is active or passive?

active semiconductorA phototransistor is an active semiconductor component that can detect various light levels with fast response times.

Which mode is used in ?

If the phototransistor is being used to assess light intensity, active mode is used. If it is being used to detect presence or absence of light, such as when a card is in a slot, then switch mode is used.photo transistor