Two Different Substances:

Poly Aluminum Chloride

PAC

Drum drying Poly Aluminum Chloride

1. Product name:
[Chinese name] Poly Aluminum Chloride (referred to as poly aluminum), also known as: flocculant, coagulant [English name] Polyaluminium Chloride, abbreviated PAC [Molecular Formula] [AL2 (OH) LnCL6-n] m [technical standard] product quality meet the national standard GB15892-2003.

2. the main features:
The product is compared with other coagulants, has the following advantages: wide range of applications to meet the wide water. Easy to quickly form a large alum, sedimentation good performance. Appropriate to a wide range of PH value (5-9 rooms), and the treatment of PH value and alkalinity of water down small. Water temperature is low, can still maintain a stable precipitation effect. Basicity than the other aluminum, ferric high, a small erosion of equipment.

3. physical and chemical indicators:
The product is a kind of inorganic polymer coagulant. Mainly through double-layer compression, charge neutralization and adsorption, adsorption and bridges, such as sediment catch mechanism of the role of networks, so that edema fine particulates and colloidal ion destabilization, aggregation, flocculation, coagulation, sedimentation, to purifying effect.

4. The use of methods:
The products (solid) and room temperature water by 1 / 3 weight ratio of adding while stirring, until completely dissolved, add water, diluted to the desired concentration, the raw water concentration of 100 ~ 500mg / when the dosage is 3 ~ 6mg / I. specific dosage should be water under the water quality test, and then select the best dosage into use.

5. packaging and storage:
Solid for the 25kg bag, inner plastic film, outer plastic woven products should be stored indoors, dry, ventilated, cool place, it and do not damp.

Poly aluminum chloride spray drying

Product Name:
Poly aluminum chloride spray drying, white chloride, molecular formula: [AL2 (OH) LnCL6-n] m technology standard: GB15892-2003

Features:
The characteristics of spray-drying depends on the pressure-type spray PAC operating principles. The pressure produced by the spray drying process of porous granules of aluminum chloride or hollow fine particles, showing dust and smoothness. As with the pending water contact better, the speed of wettable and water are stronger than other powder products. PAC spray drying production only, and
simultaneously make it into tiny particles. PAC is a water soluble substances as well as good thermal stability and solubility. 40-50% of the inhalation of aluminum chloride solution in the high-pressure pump, formed by the spray drying granular products.

In this production process, dehydration and the formation of particles at the same time.

Magnesium Chloride

[English name] abbreviation BAC [Molecular Formula] [Al2 (OH) nCI6-n] [technical standard] quality meet the national standard GB15892-2003
Features:
Aluminum chloride hydroxide in the treatment of paper making, printing and dyeing wastewater has a unique performance. Floc formation speed, high sedimentation rate, and therefore precipitation reaction time can be shortened, in the appropriate conditions to increase production capacity 1.5-3 times. Adding aluminum chloride hydroxide alkalinity in water consumption is less than when coagulation various inorganic coagulant, water treatment of PH value decreased less. Which deal with water, especially in the treatment of high concentration of water, from time to increase or less of alkaline additive and coagulant aid. The bleaching capacity than other inorganic purifying agent.
Usage:
Using the original purification equipment, aluminum chloride hydroxide will dissolve even after mixing with water, (25-30 times the liquid) and then into the water to run to use. General Water Purification their dosage of the original water one hundred thousandth, that is, 1000 tons of water per 15kg dosage is about the use of accurate, according to the different content areas by turbidity and water quality testing to find the best dosage.

The news come from:http://www.chemland-chemicals.com/

Water Treatment Chemicals, Poly Aluminium Chloride, Polyacryamide, PolyDADMAC, Biocides, Fixatives, Surface Size Agent