SFP+ is the enhanced version of the SFP (small form-factor pluggable), which supports data rates of up to 10Gbit/s Fiber Channel and Ethernet applications. It leaves more circuitry to be implemented on the host board instead of inside the module compared with the earlier XENPAK or XFP modules. Nowadays, 10 Gigabit Ethernet is becoming the interconnect of choice in data centers of all sizes providing key improvements in terms of bandwidth, latency, scalability, reliability and application performance.

10G SFP+ module is multi-purpose optical transceiver for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000Base-SX Ethernet.

Key Features of 10G SFP+:
Compliant to SFP+ Electrical MSA SFF-8431;
Compliant to SFP+ Mechanical MSA SFF-8432;
Multi rate of up to 11.3Gb/s;
10G Ethernet compliance;
2G/4G/8G Fibre Channel compliance;
Transmission distance up to 10km (SM fiber);
Low power consumption: 0.85W (Typ.);
0C to +70C case operating temperature range;
Laser Class 1 IEC / CDRH compliant;
RoHS 6/6 compliant;
Compliant with product safety standards.

Ingellen offers full line of 10G SFP+ fiber optic transceivers, including: SFP+ MM 300m, SFP+ 10km, SFP+ 40km, CWDM SFP+, DWDM SFP+, BiDi SFP+, and series of Compatible Brands such as Cisco compatible, Juniper Compatible, HP compatible SFP plus transceivers. In the following is the Cisco 10G SFP+ modules among the hottest ones.

Cisco SFP-10G-SR
The Cisco SFP-10G-SR module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco SFP-10G-SR-X
The Cisco SFP-10G-SR-X is a 10GBASE-SR module for extended operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Cisco SFP-10G-LRM
The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord.

Cisco SFP-10G-LR
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).

Cisco SFP-10G-LR-X
The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).

Cisco SFP-10G-ER
The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-mode fiber (SMF, G.652).

Cisco SFP-10G-ZR
The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW and OTU2/OTU2e module. It supports link lengths of up to about 80 kilometers on standard single-mode fiber (SMF, G.652). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.

As an experienced fiber optic manufacturer, Ingellen is capable to customize the completely Cisco compatible 10G SFP+ transceiver according to our customers' requests. Or you can choose Ingellen original 10G SFP+ transceivers as you like, which is also ideal for your networking.

 SFP(Small Form-Factor Pluggable Interface Converter) optic modules, are small form factor pluggable module for multi-mode fiber Fast Ethernet, plug into a variety of SFP-based POS, TDM and ATM interfaces on router products. This line of SFP optics supports the following three data rates at various reaches: OC-3/STM-1 SFP (155 Mbps), OC-12/STM-4 SFP (622 Mbps), and OC-48/STM-16 SFP (2,488 Gbps).

Large economies of scale can be achieved by substituting multiple single T1/E1 trunks with a single fiber connection running at 155 Mbps, which OC-3/STM-1 does. OC-3 STM-1 is a network line with transmission speeds of up to 155.52 Mbit/s (payload: 148.608 Mbit/s; overhead: 6.912 Mbit/s, including path overhead) using fiber optics. Depending on the system OC-3 is also known as STS-3 (electrical level) and STM-1 (SDH). OC-3/STM-1 is a commonly used universal interface in the telecom community. A STM-1 or OC-3 interface will reduce overall expenses and control costs by combining data and voice applications over one circuit. These modules are also used for Fast Ethernet application. Depending on the market, the benefits can be seen as soon as you subscribe to more than 20 T1 or E1 circuits simultaneously. Ingellen offers full line of SDH OC3 SFP fiber optic transceivers which support DDM/DOM, BIDI and CWDM/DWDM. The products include:

SFP-OC3-MM=
OC-3/STM-1 pluggable short-reach (2 km) transceiver module, 1310-nm wavelength, MMF, LC connector

SFP-OC3-SR=
OC-3/STM-1 pluggable short-reach (2 km) transceiver module, 1310-nm wavelength, LC connector

SFP-OC3-IR1=
OC-3/STM-1 pluggable intermediate-reach (15 km) transceiver module, 1310-nm wavelength, LC connector

SFP-OC3-LR1=
OC-3/STM-1 pluggable long-reach (40 km) transceiver module, 1310-nm wavelength, LC connector

SFP-OC3-LR2=
OC-3/STM-1 pluggable long-reach (80 km) transceiver module, 1550-nm wavelength, LC connector

The OC-3/STM-1 Module is a highly versatile access solution, suitable for various applications, including: DSLAM backhaul, POS router interconnect, Voice exchange interconnect, Interconnect of ATM switches, SDH/SONET network bridging and Distributed cross-connect.

Ingellen is a leading fiber optic manufacturer who has rich experience in fiber optical field. Ingellen's original OC-3/STM-1 SFP transceivers are designed for Fast Ethernet & SDH STM-1&SONET OC-3, which can be used in fast ethernet switch, router and other networking equipments from Cisco and other brands like HP, Juniper and so on. The SFPs are compatible with the SONET/SDH and ATM standards, and support the digital diagnostic functions specified in the SFF-8742 Multi-Source Agreement (MSA) and the extended operating temperature range from 23 to185°F (-5 to 85°C). The OC-3/STM-1 SFP transceivers module is a high performance and cost effective fiber optic transceiver. More, you can easily find other SFP modules like OC-12 SFP and OC-48 SFP there. All of them can be provided with a very good price and reliable quality.

 Ingellen Technology supplies all kinds of optical transceivers and compatible brands like Cisco. And Cisco X2 modules are supported on Cisco switches and routers.

Main features of Cisco 10GBASE X2 modules include:
Support 10GBASE Ethernet;
Hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the port with the network;
Provides flexibility of interface choice;
Supports "pay-as-you-populate" model;
Supports the Cisco quality identification (ID) feature that enables a Cisco switch or router to identify whether the module is certified and tested by Cisco;
Has optical interoperability with respective 10GBASE Xenpak, 10GBASE XFP and 10GBASE SFP+ modules on the same link.

Cisco X2-10GB-SR
The X2-10GB-SR is a Class 1 laser product, which is designed for 300m Transmission with a vertical cavity surface emitting laser (VCSEL). X2-10GB-SR, replacement for Cisco 10GBase-SR SC 300M, is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to X2 MSA. It fully complies with the multi-sourcing agreement (MSA) which enables it to work in all MSA compliant platforms. 10GBase-SR is the original multimode optics specification, and is still by far the most commonly used. As it uses a single, low cost solid state laser assembly, it is also the least expensive of the optical modules available for a 10GbE platform.

The Cisco 10GBASE-SR Module supports a link length of 26m on standard FDDI grade MMF. Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700 MHz*km MMF (OM4), up to 400m link lengths are possible. X2-10GB-SR is high performance, cost effective module supporting 300M transmission distance, also, the X2-10GB-SR is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and Demux with clock and data recovery(CDR). This X2-10GB-SR version of X2 transceiver line uses an 850nm Vcsel Laser Diode to achieve 300m over 50/125 multi-mode fiber as 10GBASE-SR of the IEEE 802.3ae.

Digital diagnostics functions of this X2 10gb transceivers are available via a 2-wire serial interface. Cisco X2 10GB SR transceiver is a multimode products used for 10G networks, it works with 850nm via multimode fiber. The Cisco X2 10GB SR Cisco module is a multimode transceiver target at the 10G applications. It works with 850nm multimode fiber and the optical interface is duplex SC. X2 10GB SR can link the equipment to fiber optic networks, max transmission distance is 300meters.

X2 10GB SR Features:
Compatible with X2 MSA Rev2.0b;
Support of IEEE 802.3ae 10GBASE-SR at 10.3125Gbps;
Transmission Distance up to 300m (MMF);
Vertical Cavity Surface Emitting Laser at 850nm;
SC Duplex Optical Connector;
Hot Pluggable 70-PIN Connector with XAUI Electrical Interface;
Management and control via MDIO 2-wire interface;
Power Supply :+3.3V, APS(+1.2V);
Diagnostic Optics Monitoring;
Temperature Range: 0~ 70 °C;
ROHS Compatible.

Note: For optical X2 modules, only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section. The X2-10GB-SR must be operatred within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.

X2 10GB SR transceivers offered by Ingellen are tested with equipment from Cisco and other companies to make sure of its compatibility, whose products are not second hand but brand new compatible transceivers. These X2 10GB SR modules are competitive price, reliable quality and prompt delivery. You also can find other Cisco products like Cisco SFP transceivers, Cisco GBIC transceivers, Cisco SFP+ modules and so on.

 Optical transceiver modules are known to be sectioned by transmission speed rates standard in the industry. 1Gbps to 10Gbps are rates that each optical module supports. You choose the right optical transceiver suitable for you based on the rates that modules support. There are a number of various transceiver modules that function differently, at different speeds and ranges and with different features. There are XENPAK pluggables, XFP modules, X2 modules, GBIC modules, SFP modules, SFP+ modules, SFP-BIDI transceivers and so on. SFP optical transceiver modules combine transmit and receive functions in a compact, low-power, low-cost package format. Rapidly accepted as the industry standard, SFP modules now are widely used to support Fibre Channel, Gigabit Ethernet (GbE), and SONET/SDH applications. More, the maturation of copper SFP transceivers is playing an important roll in enabling system designers to meet these objectives while simplifying their inventory and reducing operating costs. Modules like copper SFP have special working functions such as it conform to the SFP form factor have emerged as the best way to optimize port-level flexibility. But how much do you know the copper modules?

Copper SFP transceiver is the small form pluggable transceiver modules which use a copper line for linking, which includes transmit and receive two decision points. Radiating portion consists of laser circuit and optical maser, Receiving part consists of PIN, TIA and Limtiting Amp. Completion of the digital signal transparent O / E, the E / O conversion functions. Copper transceiver can divided into copper SFP modules and copper GBIC modules.

Copper SFP
Copper SFP module is the small form pluggable transceiver modules which use a copper line for linking. Typical copper SFP products like Cisco GLC T and SFP GE T, these SFP modules are used in Gigabit networks and they are fully compatible with 1000Base-T. SFP GE T is the copper SFP that are with extended working temperature and DOM support. Ingellen copper transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 82. 3-22 and IEEE 82.3ab, which supporting 1Mbps data- rate up to 1 meters reach over unshielded twisted-pair CAT 5 cable.

Copper GBIC
Copper GBIC refer to the GBIC that use with copper line for linking. Typical copper GBIC like Cisco WS-G5483, the copper GBIC function according to 1000Base-T standard for Gigabit Ethernet, copper GBIC use Category 5 cables to provide 1000Base-T full duplex connectivity between the transceiver and the network to 100 meters span max. Ingellen offers a range of copper GBIC transceivers which can be 100% compatible with the original brands.

Many copper SFPs products supplier like Cisco offer “tri-rate” capability or backwards compatibility with 100/10BASE-T in addition to 1000BASE-T operation through an SGMII interface. Ingellen also provides Cisco copper transceives with high performance and competitive price. Feel pleased to visit our official website www.ingellen.com to learn further information of the fiber optic transceivers.

 Copper transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 82. 3-22 and IEEE 82.3ab, which supporting 1Mbps data- rate up to 1 meters reach over unshielded twisted-pair CAT 5 cable. Copper SFPs enable system manufacturers to populate SFP ports with either copper or optical transceivers. 1000Base-T copper SFP is used for copper networks, which refers to GbE over copper, primarily Category 5, 5E, and, increasingly, Category 6 twisted-pair cable. Typical 1000Base T SFP includes Cisco GLC T and SFP GE T,these SFP modules are used in Gigabit networks and they are fully compatible with 1000Base-T. SFP GE T is the copper SFP that are with extended working temperature and DOM support.

1000Base-T copper SFP transceiver
1000Base-T SFP copper transceiver is designed for single mode (SM) optical fiber. This transceiver is compliant with Gigabit Ethernet and 1000BASE-T standards as specified in IEEE802.3-2002 and IEEE 802.3ab for 1.25 Gigabit over unshielded twisted-pair category-5 cable. It operates on standard Category 5 unshielded twisted pair copper cabling of up to 100m length. This transceiver is also compliant with RoHS, SFP MSA, FCC 47 SFR Part 15, Class B and SONET/SDH recommendations for OC-48 specifications. It is widely used in serial telecom and datacom applications.

Specification of 1000Base-T SFP:
Up to 1.25Gb/s bi-directional data links;
Hot-pluggable SFP footprint;
Extended case temperature range (0°C to +85°C );
Fully metallic enclosure for low EMI;
Low power dissipation (1.05 W typical);
Compact RJ-45 connector assembly;
RoHS compliant and Lead Free;
Access to physical layer IC via 2-wire serial bus;
10/100/1000 BASE-T operation in host systems with SGMII interface;
SFP MSA compliant;
1000BASE-X enabled by default;
Link indication feature disabled;
1.25 Gigabit Ethernet over Cat 5 cable.

Application:
LAN 1000Base-T;
Gigabit Ethernet over Cat 5 Cable;
Switch to Switch Interface;
Router/Server Interface.

The 1000Base-T SFP copper module is compliant with Gigabit Ethernet and 1000BASE-T standards as specified in IEEE802.3-2002 and IEEE 802.3ab for 1.25 Gigabit over unshielded twisted-pair category-5 cable. It ofers 1000Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. This transceiver is also compliant with RoHS, SFP MSA, FCC 47 SFR Part 15, Class B and SONET/SDH recommendations for OC-48 specifications. It is widely used in serial telecom and datacom applications. Cisco 1000BASE-T SFP modules support 10/100/1000 auto negotiation and Auto MDI/MDIX. Ingellen is a professional fiber optic manufacturer who aims at making your optical network simple. Ingellen offers 1000Base -T copper SFP and 10/100/1000Base-T copper transceivers with stable quality and competitive price. These modules can be installed into optical SFP slots enabling an optical Ethernet port (1000Base-X) to be converted into a copper Ethernet port (1000Base-T) either in the field or in production. You can find original 1000Base-T SFP transceiver or Cisco GLC T(1000Base-T SFP module) at Ingellen, which are ideal for your optical networking.