CN900 universal car key programmer now sells on careucar with a promotion price (10% OFF), which is a powerful car key programmer equipped with 46 cloner box and Toyota smart key YS30 mother key.

And now, I want to show you the whole detailed operation process as follows:

Step1: Keep CN900 car key programmer in power and connect with computer via USB port, click the “CONNECT” button, “Register YS30” will be shown in the top right corner.Step2: Put YS30 in the introduction area, and click “Register YS30” button, after register successfully, subsequently card ID shows on the screen and then take out the YS30 from introduction area.Step 3: Return back to the CN900 home page, click “Special” button, and then click “Smart key”, put the smart key into transponder area, subsequently click “GEN”.Step 4: Select 3370 and click “Next”.Step5: Select car model and Click “Next”.

Step 6: Put 3370 SK in the introduction area and ensure the location is right to avoid write data failed.

Step 7: after making successfully, go to the car and match the remote, the method is the same as original factory. (Note: when the programmer is prompt to insert the new smart card, put 3370 SK in the introduction area, and then put the YS30 card to instrument desk and close “engine-start” button, the method of match 5290 smart key is the same as 3370SK).