drill edm-Cutter production are listed on the new EDM machine
#br##br#Cutter productidrill edmon cut discharge processing machine "U1310" start selling line from March 2， 2010。 Is characterized by the shape accuracy of ± 3μm Rz3μm the best surface finish on the processing width is 1310mm (workpiece width 1600mm)， large parts of the weight of 6000kg of processing。 Mainly for processing of large workpieces use of certain requirements on the accuracy， such as the stator core， ultra-thin TV´s chassis， the blades of the turbine disk to install part of the (tree part)， and printers with roller (Roller)。 Without specifically for the cutting and rotary cut after the process can get the required parts。
Improved body rigidity in order to increase accuracy， the feed screw and the guide bar using a large-scale high-rigid materials， the shipping weight of 6000kg the workpiece， the deflection control of the bench above in less than 10μm。 Control of the discharge， can suppress the deformation due to the deflection of wire electrical discharge GS Cut "。 Through the use of working fluids (water) from the top and bottom part of the nozzle to impose a high pressure into the processing part of the "HEAT" technology to achieve high-speed processing。 Nozzle to leave the state of the workpiece surface can be as much as possible the processing of liquid poured into the processing part， not only in the nozzle close to the workpiece。 Working fluid temperature in 0。1 ° C for management， with the temperature control device within the body to maintain body temperature at a certain level， which can suppress the thermal deformation。 |
